MSR Hubba Hubba HP – Review

I’ve owned a MSR Hubba Hubba HP tent for well over a year and it has become my favourite tent. Room enough for two but light enough to be carried by one.

MSR Hubba Hubba HP - Review

The new updated HP models are now available in a more subdued green rather than just the YELLOW of the previous version. The green is light enough not to prevent light getting into the tent making the inner a much pleasant place to be.

MSR Hubba Hubba HP - Review

Specification:

Colour: Pale Green
Capacity: 2 person + gear
Floor + Vestibule Area: 29 + 17.5 sq. ft./2.8 +1.6 sq. m
Interior Peak Height: 40 in./100 cm
Flysheet weight: 648g / 1lb 7oz
Inner tent weight: 598g / 1lb 5oz
Poleset weight: 478g / 1lb 1oz
Total weight: 1804 / 4lbs (assumes ultralight pegs used)
Footprint weight: 270g / 9.5oz
Total Fly with Footprint & Poleset weight: 1476g / 3lbs 4oz (assumes ultralight pegs used)

MSR Hubba Hubba HP - Review

Hubba Hubba is essentially a free standing tent. The green anodised pole (that becomes 1 x piece) holds the inner taught and the outer is then slung over the top. This is a really easy set up and if wanted the outer or inner can be pitched on its own. I opted for the Hubba Hubba footprint. It adds a great deal of protection for the tents groundsheet for a very small weight penalty.

The poles setup creates an inner tent with near vertical side walls which gives the Hubba Hubba a really good roomy feel. For a relatively small footprint the design maximises the space available. I find the Hubba Hubba big enough to handle a couple of Thermarest Neoairs side by side with room to spare.

Two doors and therefore two porches in which to store kit is great and gives a little bit more flexibility when pitching the tent in varying weather conditions. Each end of the fly also incorporates a vent system which can be held open or closed depending on the prevailing conditions. The guy lines are of a good quality and a sensible length. MSR are pretty tight when it comes to supplying enough/spare pegs which gives a slightly false weight reading, so I added a couple of additional pegs to ensure I had enough for all of the pegging points, the guys and to have a couple spare.

Getting the fly lined up perfectly can be a little bit tricky and getting the everything snugged down and in place can take a little bit of time. It’s well worth doing and once you have pitched the tent a few times you find it doesn’t take long to get everything lined up and perfectly pitched.

I plan to give the tent a good hammering over the course of the next couple of months and also have the extended porch to test out.

Posted in

Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.