Unsponsored

Paddling tips, tricks, news and gear reviews from an Unsponsored point of view

Tag: biner

Petzl Vertigo Wire Lock – First Look (2016)

We’ve had an original Petzl Vertigo here at Unsponsored HQ for a few years and have really liked it’s performance. Petzl have been on the case and have updated the Vertigo using i-beam technology. Just like the original the Petzl Vertigo has been primarily designed for ease of clipping in with the added bonus of having a locking key gate. The new construction has shaved off 2 grams.

Petzl Vertigo

Continue reading

Carabiners

Walk into any climbing shop and you’ll be presented with a wide array of carabiners, loads of sizes, loads of shapes, loads of colours and a range of prices.

What ever carabiner you choose to buy please make sure that it is a type that is rated for climbing/caving and that it is suitable for job you will be asking it to do. A carabiner suitable for climbing will have its strength rating forged, stamped or etched on it. It should also conform to the relevant PPE standard (EN 12275, the standard for mountaineering connectors), this again should be present on the carabiner.

Carabiners

There are some really super light carabiners available out there that are great for climbing but could be too easily damaged/compromised whilst on the river. In instances where hauling, belaying or security are required locking carabiners are best. I carry four locking carabiners as part of my kit, but also have a couple of non-locking carabiners in my boat for clipping gear into that can be called into service if required.

The number you should carry is subjective – Mountainbuzz, Pin Kit.

Continue reading

GoPro Tether

Losing a GoPro because the sticky mount has failed is not a nice experience. I have been there. Using a leash or tethering system has become a key part of using a GoPro, especially when attached to a kayak, paddle or helmet. Since the release of the Blackout housing and GoPro Hero 4 the usual place to add a leash to tether the camera has gone.

GoPro have removed access to the metal bar that acts as part of the hinge, this was used by many to attach a thin piece of cord although some cases have failed due to this. There are two alternatives to using the hinge that depend upon the thumbscrew on the QR mount.

unsponsored-gopro-tether-leash-4

Continue reading

Pin Kit – Carabiners/Karabiners

Walk into any climbing shop and you’ll be presented with a wide array of carabiners, loads of sizes, loads of shapes, loads of colours and a range of prices.

What ever carabiner you choose to buy please make sure that it is a type that is rated for climbing/caving and that it is suitable for job you will be asking it to do. A carabiner suitable for climbing will have its strength rating forged, stamped or etched on it. It should also conform to the 0120CE standard, this again should be present on the carabiner.

DSC02840

There are some really super light carabiners available out there that are great for climbing but could be too easily damaged/compromised whilst on the river. In instances where hauling, belaying or security are required locking carabiners are best. I carry four locking carabiners as part of my kit, but also have a couple of non-locking carabiners in my boat for clipping gear into that can be called into service if required.

The number you should carry is subjective – Mountainbuzz, Pin Kit. Continue reading

© 2020 Unsponsored

Theme by Anders NorénUp ↑