Over the course of the last few weeks I have welded up a Dagger Mamba (twice – two different splits). The last split was located in the centre of the kayak right underneath the seat.
To get a good weld both inside and out I removed the seat. Given the size of the unit I thought that it would be a fairly difficult exercise but it turned out to be very easy.
The back band was removed so that access was a little easier, then all bolts were removed. Four were located on the seat posts and the fifth on the central pillar/storage area. The seat was then lifted and twisted straight out.
I took a few images of the Dagger Contour outfitting along the way and thought a close up of the seat out of the boat may be of interest to some. So here they are!
Continue reading
Recent Comments